Peningkatan Kompetensi Estimasi Biaya Konstruksi melalui Pelatihan BIM Revit untuk Mahasiswa Teknik Sipil Di JABODETABEK

Agung Sakti Meldian; Marysca Shintya Dewi; Shinta Elsa Melsandi; Ade Faizal Mukti

doi:10.58266/jpmb.v4i2.236

Authors

Agung Sakti Meldian Universitas Dian Nusantara, Indonesia
Marysca Shintya Dewi Universitas Dian Nusantara, Indonesia
Shinta Elsa Melsandi Universitas Dian Nusantara, Indonesia
Ade Faizal Mukti Universitas Dian Nusantara, Indonesia

DOI:

https://doi.org/10.58266/jpmb.v4i2.236

Keywords:

Building Information Modeling (BIM), Autodesk Revit, Estimasi Biaya, Quantity Take-Off, Pendidikan Teknik Sipil, Konstruksi Digital, JABODETABEK, Pelatihan Teknik

Abstract

Pelatihan Building Information Modeling (BIM) menggunakan Autodesk Revit untuk estimasi biaya konstruksi merupakan strategi peningkatan kompetensi bagi mahasiswa teknik sipil di wilayah JABODETABEK, khususnya dalam menghadapi tantangan digitalisasi di bidang konstruksi. Tujuan utama dari pelatihan ini adalah membekali peserta dengan pemahaman dan keterampilan teknis dalam membuat model digital, melakukan Quantity Take-Off, serta menyusun estimasi biaya secara efisien melalui Revit. Metode pelatihan menggunakan pendekatan kuantitatif deskriptif dengan pelaksanaan intensif selama tiga hari, disertai evaluasi pre-test dan post-test untuk mengukur peningkatan kompetensi. Hasil pre-test menunjukkan rata-rata 47,30% dan meningkat menjadi 74,50% pada post-test, dengan rata-rata peningkatan sebesar 27,20%. Selain itu, penilaian terhadap tugas proyek memperlihatkan skor rata-rata sebesar 84,11%, yang mencerminkan keberhasilan peserta dalam mengaplikasikan BIM untuk estimasi biaya. Evaluasi kepuasan peserta menunjukkan nilai rata-rata 4,24 dari 5, yang menandakan pelatihan ini diterima dengan baik. Pelatihan ini terbukti efektif dalam meningkatkan keterampilan mahasiswa dalam perencanaan dan estimasi biaya berbasis BIM, serta dapat dijadikan model pembelajaran terapan di lingkungan perguruan tinggi teknik.

References

Al-Musawi, R., & Naimi, S. (2023). Evaluation of construction project’s cost using BIM technology. Mécanique, Matériaux, Électricité et Procédés, 10(2), 1–15.

Clark, M. (2019). A framework for BIM model‑based construction cost estimation (Skripsi tidak dipublikasikan). Departemen Teknik Sipil.

Gołaszewska, M. (2017). Challenges in takeoffs and cost estimating in the BIM technology, based on the example of a road bridge model. Technical Transactions (Civil Engineering), 4, 71–79.

Hendrickson, C. T., & Au, T. (2024). Quantity take-off. Diakses dari https://en.wikipedia.org/wiki/Quantity_take-off

Huang, Y. (2021). Streamlining takeoff and estimating with BIM: A case study of a construction cost estimating course. Journal of Civil Engineering and Architecture, 15(1), 35–41.

MDPI. (2022). BIM and digital tools for state‑of‑the‑art construction cost estimation. Buildings, 12(4), 396.

Novatr. (2024, Juni 17). BIM: A game-changer in cost estimation for civil engineering projects. Novatr Blog. https://www.novatr.com/blog/bim-in-cost-estimation

Taghaddos, H., Mashayekhi, A., & Sherafat, B. (2019). Automation of construction quantity take-off using Building Information Modeling (BIM). arXiv preprint arXiv:1907.10174. https://arxiv.org/abs/1907.10174

Rahimi, M. Z., & Khan, H. (2024). Building information model for cost estimation and scheduling in building architecture. Global Journal of Engineering Design and Technology, 13(1), 192–205.

Al‑Musawi, R., & Naimi, S. (2023). Evaluation of construction project’s cost using BIM technology. Mécanique, Matériaux, Électricité et Procédés, 10(2), 1–15.

Haider, U., Khan, U., Nazir, A., & Humayon, M. (2022). Cost comparison of a building project by manual and BIM. Civil Engineering Journal, 8(5), 1234–1245.

Huang, Y. (2019). Implementing BIM for performing detailed construction estimates in a CM curriculum. ASEE Southeast Section Conference Proceedings, 2019, 1–10.

Maghiar, M. (2016). BIM-based estimating and its applications in support of cost estimation and cost planning. ASEE Southeast Section Conference Proceedings, 2016, 1–8.

Pishdad, P., & Onungwa, I. O. (2024). Analysis of 5D BIM for cost estimation, cost control and payments. Journal of Information Technology in Construction, 29, 525–548.

Taghaddos, H., Mashayekhi, A., & Sherafat, B. (2019). Automation of construction quantity take‑off using building information modeling (BIM). arXiv preprint arXiv:1906.02400.

Maghiar, M. (2016). BIM-based estimating and its applications in support of cost estimation and planning. ASEE Southeast Section Conference Proceedings.

Li, H., Lu, M., & Al-Hussein, M. (2020). BIM-Based Integrated Framework for Detailed Cost Estimation and Schedule Planning of Construction Projects. Proceedings of the 31st ISARC, 286–294.

Sapub. (2021). Impact of BIM-based quantity take off for accuracy of cost estimation. International Journal of Civil Engineering and Management, 10(3), 245–252.

Reddy, A. R. (2020). Integrating BIM in cost estimation: Assessing the benefits and challenges. European Journal of Advances in Engineering and Technology, 7(4), 112–120.

Zhang, P., & Huang, Y. (2020). BIM-based preliminary estimation method considering the life cycle LOD 2 and actual cost data. International Journal of Construction Management, 20(4), 300–312.